Facial

I want to introduct something about Kint, Woven, Shirt, Sweater And Other Garment.

We have the pleasure to introduce ourselves as a leading Readymade Garments buying house & Manufacturer of all kinds of Knit / Woven / Sweater for a long time and we have our exports network almost allover the world being a company under DOT Group. We have a strong reliable Technical wing, Compliance & Logistic supports wing, Distribution wing, Computerized MIS systems, R& D dept. And experienced management to execute whole business with modern business methodology. Our approach is professional and to use the cutting edge technology to make faster & accuracy the whole business-cycle i. E from 1st communication to reach the goods to buyers. So, we can meet for any quality products and we are enable to offer you competitive cheap price with shortest possible production time and on time shipment with our chain networking activities. We maintain faster commutation for minimize the time system loss. We exports our products to U. S. A., Canada, Europe, Africa and other Asian Countries. We a




Facials may include the use of a facial mask.

For other uses, see Facial (disambiguation).

A facial is a cosmetic treatment of the face, commonly involving a variety of skin treatments, including: steam, exfoliation, extraction, creams, lotions, masks, peels, and massage. Normally performed in a beauty salon but it is also a common spa treatment.

Facials are generally categorized, for example:

European Facial

Mini-Facial

LED Light Therapy Facial

Tools used in facial treatments

facial bed (plinth) or chair

make up tray

clean sheet or other covering

cotton (roll)

cotton pads

cotton swabs and pledgets

gauze

plastic bobby pins/safety pins

sponges

tissues

Facial Massager

antiseptic lotion

astringent

cleansers and make-up removers

hand sanitizers

massage cream or lubricating oil

facial masks

moisturizers

sun protection products

tonic lotions

skin exfoliators/peels

See also

Spa treatment

Facial hair

Facial analysis

Facial animation

Facial nerve

Maxillofacial surgery

External links

Spa Facial 101 - the steps to a better complexion



v?d?eCosmetics

Products

Lips: Lip gloss? Lip liner? Lip plumper? Lipstick

Face: Concealer? Foundation? Face powder? Rouge? Bindi? Thanaka? Tilaka? Cleanser-Toner-MoisturizerEyes: Eye liner? Eye shadow? Kohl? MascaraOther: Shampoo-Conditioner-Styling cream? Nail polish ? Anti-aging cream? Body powder? Cold cream? Sindoor

Ingredients

International Nomenclature of Cosmetic Ingredients? List of ingredients

Related topics

Cosmetic advertising? Beauty salon? Spa? Cosmetology? History of cosmetics

Treatments

Cosmetic surgery? Botox? Facial? Manicure? Pedicure? Hair removal ( Waxing - Threading )? Hair styling

Major brands

Almay? American Beauty? Anoo's? Artistry? Aveda? Avon? Bath & Body Works? Biotherm? Bobbi Brown? The Body Shop? Bonne Bell? Burt's Bees? Cargo? Carol's Daughter? Clarins? Clinique? CoverGirl? Creme 21? Daigaku Honyaku Center? Dr. Hauschka? Elizabeth Arden? Est Lauder? Faberg? Hard Candy? Helena Rubinstein? Kanebo Ltd.? Kao Corporation? Kevyn Aucoin? Kiehl's? Lanc?me? Laneige? Laura Mercier? Lise Watier? L'Orl? Love Cosmetics? Lush? MAC Cosmetics? Mary Kay? Max Factor? Maybelline? ModelCo? Nars? Natural Wonder? Neal's Yard Remedies? Neutrogena? Nexxus? Nivea? Open Sundaes? Oriflame? Origins? Red Earth? Revlon? Richard Hudnut? Rimmel? Sephora? Shiseido? Shu Uemura? SK-II? Stila? Tom Ford Beauty? Trish McEvoy? Ulta? Urban Decay? Vichy? Victoria's Secret? Wella

Categories

Chemicals? Companies? People? History

Categories: Skin care(and so on)
To get More information , you can visit some products about
wall switch timer,
resin statue,
.
The Kint, Woven, Shirt, Sweater And Other Garment products should be show more here!

Murder of Suesan and Sheila Knorr

I want to introduct something about I/C Flying Saucer(E15932).

Ni-mH Battery:3x1.2V Control distance:10M Charging time:10-15minutes Flying time:3-4 minutes product size:26x26x13.2cmpcs/ctn:24 g.w./n.w.:11/9.6kg carton size:81.5x35x54cm I/C Flying Saucer(E15932) mo


Suesan Marline Knorr (September 27, 1966 - July 16, 1984), and Sheila Gay Sanders (March 13, 1965 - June 24, 1985), were teenaged sisters from Sacramento, California, who were both abused and later killed by their mother, Theresa Knorr. Suesan was shot and later killed by being burned alive and Sheila was beaten and then died of starvation while locked in a closet.

Contents

1 Abuse

2 Suesan's Death

3 Sheila's Death

4 Aftermath

5 References

6 External links


//


Abuse

None of Theresa Knorr's children were immune to the physical and psychological abuse she doled out. However, according to an interview with her surviving daughter, Terry (1970-2003), in an episode of A&E's Cold Case Files (titled "Mommy's Rules"), Knorr had a special hatred for her daughters Suesan and Sheila, fueled by jealousy that the girls were growing up and blossoming into young women while she faced the prospect of growing old and losing her looks. For years Knorr beat and tortured her daughters in various ways, including burning them with cigarettes and forcing them to eat large helpings of macaroni and cheese mixed with lard (if they vomited, she forced them to eat their vomit).

Suesan's Death

In a heated argument in 1982, Cross grabbed a 22-caliber pistol and shot Suesan in the chest. The bullet became lodged in her back, but her mother refused to seek medical help and left Suesan to die in the family bathtub. Suesan survived, so Cross then handcuffed her to a soap dish and began to nurse her back to health. Suesan eventually recovered from her wounds without professional treatment .

In 1984, Suesan decided to tell her mother she would like to move out. Cross agreed under one condition: that Suesan let her remove the bullet from her back. The removal took place on the kitchen floor, using Mellaril capsules and liquor as the anesthetic. Cross ordered Robert, Suesan's 15-year-old brother, to remove the bullet with a scalpel. Infection soon set in, her skin turned yellow from jaundice, and she became delirious. Suesan lay dying on the floor and Cross demanded the other children to merely walk over her. As Cross' daughter Terry told Cold Case Files, Cross told her other children that Suesan's illness was a result of possession by Satan and that the only way to purge the demon was with fire. She asked Suesan's brothers, Robert and Bill, to help her to dispose of their sister. They drove Suesan to Sierra Nevada, Interstate 80 outside Truckee, laid her down, poured petrol on her and burned her alive .

Sheila's Death

The following year, Suesan's older sister, 20-year-old Sheila, also died at the hands of her mother. According to Terry, Cross accused Sheila of transmitting an STD to her via a toilet seat, and thereafter, Cross's abuse of Sheila escalated. Sheila was locked in a closet and died of dehydration several days later. Her body was packed into a cardboard box and dumped along the side of a road. She remained unidentified for years afterward.

Subsequently, Terry Knorr claimed, Cross forced her to burn down the Sacramento apartment the family had called home, hoping to destroy any evidence that might implicate her in Sheila's death. Terry later said she survived because she stood up to her mother and demanded to be allowed to leave the house.

Aftermath

Cross was eventually caught based on a police report from Terry, who, according to her Cold Case Files interview, was inspired to contact authorities after watching an episode of America's Most Wanted. On November 15, 1993, Theresa was charged with two counts of murder, two counts of conspiracy to commit murder, and two special circumstances charges: multiple murder and murder by torture. On October 17, 1995, she was sentenced to two consecutive life sentences. She will be eligible for parole in 2027.

Terry Knorr died in 2003 of a heart attack at the age of 32, just three and a half months after her appearance on Cold Case Files.

References

^ a b Article at crimelibrary.com, page 8

Complete article at crimelibrary.com

http://www.littoral.net/books/mothers_day/mothers_day.html

See also: Cold Case Files (A&E), Episode #49: "Mommy's Rules" (featuring an exclusive interview with Terry Knorr).

External links

Suesan Marline Knorr at Find A Grave

Sheila Gay Knorr at Find A Grave

Theresa (Terry) Knorr Groves at Find A Grave

Categories: 1966 births | 1984 deaths | 1965 births | 1985 deaths | Murdered American children | People murdered in California(and so on)
To get More information , you can visit some products about
everyday dinnerware,
Stainless Steel Tableware,
.
The I/C Flying Saucer(E15932) products should be show more here!

Ceramic forming techniques

I want to introduct something about .




Ceramic forming techniques are ways of forming ceramic shapes. This can be used to make everyday tableware from teapots, to engineering ceramics such as computer parts. Methods for forming ceramic powders into complex shapes are desirable in many areas of technology. For example, such methods are required for producing advanced, high-temperature structural parts such as heat engine components, recuperators and the like from ceramic powders. Typical parts produced with this production operation include impellers made from stainless steel, bronze, complex cutting tools, plastic mold tooling, and others. Typical materials used are: wood, metal, water, plaster, epoxy and STLs, silica, and zirconia. This production operation is well known for providing tools with dimensional stability, surface quality, density and uniformity. For instance, on the slip casting process the cast part is of high concentration of pure ceramic powder with little additive, this improves uniformity. But also, the plaster of Paris mold draws water from the poured slip to compact and form the casting at the mold surface. This forms a dense cast.

Contents

1 Forming Techniques

1.1 Slip Casting

1.1.1 Ceramic Shell Casting

1.1.2 Other Techniques

1.1.3 Technical Ceramics

2 External links


//


Forming Techniques

There are many forming techniques to make ceramics, but one example is slipcasting. This is where slip, liquid clay, is poured into a plaster of Paris mold. The water in the slip is drawn out of the slip, leaving an inside layer of solid clay. When this is thick enough, the excess slip can be removed from the mold. When dry, the solid clay can then also be removed. The slip used in slip casting is often liquified with a substance that reduces the need for additional water to soften the slip; this prevents excessive shrinkage which occurs when a piece containing a lot of water dries.

Slip Casting

Main article: Slipcasting

The original mold for a slip cast, as well as the pieces themselves in many individual works of ceramics, can be thrown on a potter's wheel. The advantage of the wheel in forming ceramic vessels is that its rotation allows symmetrical adjustments to the piece, resulting in a uniform and balanced pot. Throwing, as forming ceramics on a wheel is called, consists of three or four steps. First, the clay must be centered on the wheel. (The pot will likely be ruined if this step is completed improperly or if the piece is allowed to become un-centered at any point in the process.) Second, the center must be opened. Third, the clay forming the walls of the pot must be squeezed gently in order to force the clay upwards, causing the pot to become taller. Fourth (this step is omitted entirely in the creation of simple objects such as cylinders and bowls) the pot must be coaxed into the desired shape by carefully pushing in the appropriate direction. A finished pot is cut off the wheel with a wire tool. "Feet" may be trimmed into the bottoms of some pieces; this is accomplished by allowing the thrown pot to dry to leather hard and then centering it upside down on the wheel, then carving into the middle of the base of the piece with a trimming tool.

Slip-casting methods provide superior surface quality, density and uniformity in casting high-purity ceramic materials over other ceramic casting techniques, such as hydraulic casting, since the cast part is a higher concentration of pure ceramic powder with little additives. Ceramic powder is compacted in the slip casting process and sintered or bonded together at high furnace temperatures. A slip is a crowded suspension of fine ceramic powder in a liquid such as water or alcohol with small amounts of secondary materials such as dispersants, surfactants and binders. Early slip casting techniques employed a plaster-of-Paris block or flask mold. The plaster-of-Paris mold draws water from the poured slip to compact and form the casting at the mold surface. This forms a dense cast form removing deleterious air gaps and minimizing shrinkage in the final sintering process.

Ceramic Shell Casting

Ceramic shell casting techniques using silica, zirconia and other refractory materials are currently used by the metal parts industry for `net casting,` forming precision shell molds for molten metal casting. The technique involves a successive wet dipping and dry powder coating or stucco to build up the mold shell layer. The shell casting method in general is known for dimensional stability and is used in many net-casting processes for aerospace and other industries in molten metal casting. Automated facilities use multiple wax patterns on trees, large slurry mixers and fluidic powder beds for automated dipping.

Other Techniques

There are also several traditional techniques of handbuilding, such as pinching, soft slab, hard slab, and coil construction.

Other techniques...(and so on)
To get More information , you can visit some products about
white linen cabinet,
Iron With Steam,
.
The products should be show more here!

Wacky WallWalker

I want to introduct something about .




The Wacky WallWalker was a toy molded out of a sticky elastomer. It was shaped similar to an octopus, and when thrown against a wall would "walk" its way down. It was a hugely popular toy in the early 1980s.

Before its introduction in the United States, Ken Hakuta received in the mail several sticky octopus-like toys from his mother, who lived in Japan. They were intended for his children, but Hakuta found himself fascinated with the toy, which was called Tako in Japan. He realized their marketing potential, and after purchasing rights to the product in 1983 for $100,000, he began to market them locally in Washington, D.C., dubbing them "Wacky WallWalkers". Their popularity was mediocre, until Nina Hyde of The Washington Post wrote a feature story on them. This created a buzz, and people in the Washington area flooded local stores to purchase them.[citation needed] Within the next several months, hundreds of media outlets ran stories on them, creating one of the biggest selling fads of all time.[citation needed] As the fad began to decline, over 240 million Wacky WallWalkers had been sold, raking in about 80 million dollars.[citation needed]

The popular toy was featured in the 1983 animated Christmas special Deck the Halls with Wacky Walls, starring the voices of Daws Butler, Tress Macneille, and Marvin Kaplan. The show featured seven Wallwalkers from the planet Kling-Kling: Big Blue, Springette, Bouncing Baby Boo, Crazylegs, Stickum, Wacko, and their leader, Kling-Kling . One character in the special was modeled after Hakuta's son, Kenzo.

References

^ Elizabeth Church. "Want to buy some goo?" The Globe and Mail (Canada) 21 July 1999. M1.

^ http://www.imdb.com/title/tt1150937/

^ Tom Shales. "The Year Dan Rather Lost His Place and Other Great Moments in TV '83" The Washington Post, 6 January 1984. D1.

^ Briefing. James F. Clarity and Warren Weaver Jr. The New York Times, 11 July 1983. Section A; Page 12, Column 1.

External links

Wacky WallWalker History

The Wacky WallWalker Fad at X-Entertainment

Video promoting Wacky Wall Walker at the end of a Corn Pops Commercial at

Categories: 1980s fads | 1983 introductions | Toys of the 1980s

Hidden categories: Articles lacking sources from March 2008 | All articles lacking sources | All articles with unsourced statements | Articles with unsourced statements since March 2008(and so on)
To get More information , you can visit some products about
computer tool case,
Cigarette Lighter Case,
.
The products should be show more here!

Snow removal

I want to introduct something about Speed Control for Cummins.

EFC for cummins: 1. 3062322 2. 3044195 3. 3044196




A sidewalk clearing plow in Ottawa, Canada

Snow removal is the job of removing snow after a snowfall to make travel easier and safer. This is done by both individual households and by governments and institutions.

Contents

1 Clearing by individuals

2 Clearing by contractors

3 Clearing by cities

4 Surface treatments

5 Snow removal tools

6 See also

7 References

8 External links


//


Clearing by individuals



Manual snow removal

In countries with light snow, brooms can be used to brush off snow from walks and other surfaces. In colder regions with more precipitation, the main tools of the private snow clearer are the snow shovel, a large lightweight shovel used to push snow and lift it, and the snow scoop, a large and deep hopper-like implement fitted with a wide handle and designed to scoop up a load of snow and slide it on any slippery surface to another location without lifting. Shovelling entails a considerable amount of work and can be a strain on the back and the heart. Each year many senior citizens and middle aged persons die from heart attacks while shovelling snow[citation needed]. Those unwilling or unable to labour, especially those with large driveways or other substantial surfaces may use a snow blower, as well as people that live in areas with long lasting winters with large amounts of snowfall. Others may hire a contractor with a plow bearing truck or a shovel. After a large snowfall businessmen with plow trucks often drive through cities offering to plow for money. A recent technological advance is the snowmelt system that heats the pavement from below and melts snow and ice after a period of time. Such systems are expensive to install and operate and they are not cost effective in areas with very low winter temperatures and large snowfalls. Some governments offer free snow clearing for the elderly and others in need.

Dealing with ice is more difficult. Snow blowers are rarely effective. Picks are sometimes used, but a solid spade can break through most ice. There is always the risk of damaging the pavement with these instruments. Icy areas can be covered with salt or some other substance, bags of which are widely available.

Clearing by contractors



Clearing a residential driveway in Incline Village, Nevada

Hiring a contractor with a winter service vehicle or a shovel.

In many high elevation or heavy snow accumulating areas, companies with snow removal equipment offer to provide services to remove the snow. Contractors may work on a per-time basis, full season contract, or will-call status. Per-time service (or per-push) is usually invoiced monthly and customers will be charged for each time services are provided. Some companies will charge per-time and per-inch where the depth of the snow is even taken into account. A full season contract is quoted and paid upfront at the start of the season and services will be provided automatically according to the contracted terms. All companies have different terms so make sure to understand the agreement. For example, some full season contracts will expire after X amount of trips where others are unlimited. And finally, will-call service is where the client makes contact with the snow removal company to initiate a single clearing. This is not an automatic service and charges are usually higher for will-call jobs.

Snow removal services may include driveway and parking area snow removal, walkway and deck handwork, and occasionally roof clearing. Contractors use hand shovels, walk behind snowblowers (or snow throwers), truck plows, skid-steers, light-weight tractors, and heavy front-end loaders. Many times, these machines will require use of tire chains to perform their tasks. Snow may be pushed by plowing methods or blown to an area of the property by snowblowers. Contracts may apply sand or salt in some locations to help melt ice accumulations.

Many snow removal contractors will require installation of snow poles or snow staking along the driveway. This is to keep equipment out of the landscaping and to help identify the perimeter of an area.

Contractors should be licensed and insured.

Clearing by cities



Snowblower in Rocky Mountain National Park, 1933

Cities clear snow on a much larger scale than individuals. Most cities in areas that get regular snow maintain a fleet of snow clearing vehicles. The first to be dispatched are gritters who do some plowing but also salt the road. The salt, via freezing point depression, helps melt the snow and ice and also gives vehicles more traction. Later, generally once the snow has ceased falling, front end loaders with snowplow attachments and graders cover every street pushing snow to the side of the road. Salt trucks often then return to deal with any remaining ice and snow. The trucks generally travel much faster than...(and so on)
To get More information , you can visit some products about
Truck Transmission Parts,
Wheel and axle,
.
The Speed Control for Cummins products should be show more here!

ControlNet

I want to introduct something about Genuine Leather Handbags.

We have a rich collection of high quality genuine leather handbags for ladies and the models that we publish on alibaba are only a few of them. Each model has different colors and can be made with different types of leathers (suede/vegetal leather/washed leather). All have excellent finishings and very clean craftsmanship. Should you have further queries please contact our company, ms. Nirvana asaduryan for prompt responses.


ControlNet is an open industrial network protocol for industrial automation applications, this is also known as a fieldbus. ControlNet was earlier supported by ControlNet International, but in 2008 support and management of ControlNet was transferred to ODVA, which now manages all protocols in the Common Industrial Protocol family.

ControlNet defines a unique physical layer based on RG-6 coaxial cable with BNC connectors. Features which sets ControlNet apart from other fieldbusses includes the built in support for fully redundant cables and the fact that all communication on ControlNet is strictly scheduled and highly deterministic.

The physical layer signaling is based on Manchester code at 5 Mbit/s.

The ControlNet application layer protocol is based on the Common Industrial Protocol (CIP) layer which is also used in DeviceNet and EtherNet/IP.

Controlnet's scheduled message system requires that the media be robustly designed and meticulously maintained. A break in the media invariably causes any running program to stop and often leads to processor faults. The media is checked with a handheld device known as a "Network Checker" in conjunction with a DSO running at 100 MHz or higher. Controlnet was designed after the PLC5 was released, so the PLC5 has some inherent troubles using it. In Rockwell PLC systems the network is configured via RSNetworx For Controlnet. By opening this program the network is scanned and a graphical screen is populated with each node on the network. Each processor has a "scanlist configuration" which shows its connections to remote racks, frequency drives, and any other devices that communicate with it. This program performs for remote racks essentially the same functions as the I/O configuration in the local rack. In the I/O configuration table of Logix, analog cards can be assigned block transfers. In RSNetworx for Controlnet analog cards in remote racks are assigned scheduled messages in blocks of words. Processors communicate with each other via "Produce" and "consume" tags. A processor's produce tag, for instance, may be 50 words starting at N35:900. This block will be broadcast for any other processor to consume. Likewise, the same processor may consume 50 words starting at N32:950 from another processor.

External links

ODVA website

ControlNet International website

This computer network-related article is a stub. You can help Wikipedia by expanding it.

Categories: Serial buses | Network protocols | Automation | Industry | Production and manufacturing | Computer network stubs(and so on)
To get More information , you can visit some products about
Chili Garlic Sauce,
choline and inositol,
.
The Genuine Leather Handbags products should be show more here!

Split-flap display

I want to introduct something about Timber.

Highly sought Autralian native hardwoods green sawn or kiln dried timber forms. Cut to size, Full ranges of grades. The timber species are: Blackbutt, Brush Box, Spotted Gum, Blue Gum, Tasmanian Oak, Red Gum, Red Ironbark, Rose Gum, White Mahogany, Tallowwood, Turpentine, Cypress and Camphor Laurel. Timb




Flap display as departure board in Hannover train station, Germany



Section of a split-flap display board at Frankfurt (Main) Hauptbahnhof (taken April 2005).



Schematic of a split-flap display in a digital clock display



Flap departure board at Gare du Nord (Paris)

A split-flap display, sometimes simply flap display, is a display device that presents alphanumeric text, and possibly fixed graphics.

Contents

1 Description

2 Pop culture references

3 See also

4 Patents

5 External links


//


Description

Each character position or graphic position has a collection of flaps on which the characters or graphics are painted or silkscreened. These flaps are precisely rotated to show the desired character or graphic. Today, these displays are often found in train stations and airports, where they typically display departure and/or arrival information, although digital equivalents are far more common now.

Such displays are often called 'Solari boards', named after Solari & C. Udine, a large manufacturer of such boards continuing to the present day.

Sometimes the flaps are large and display whole words, and in other installations there are several smaller flaps, each displaying a single character. The former method is of course limited on the words it can display by what is on the flaps, whereas the latter system is not and output messages can be changed without the need for the addition or replacement of flaps, although images cannot. In the example image on the right, we can see that the destinations in the centre of the picture of split up into characters, whereas the messages left and right of these occupy entire flaps.

Flip-dot displays and LED display boards may be used instead of split-flap displays in most applications. Their output can be varied more easily (by reprogramming instead of replacement of physical parts in the case of graphics) but they suffer from lower readability. They also can refresh more quickly, as most split-flap displays only rotate in one direction.

Many game shows of the 1970s used this type of display for the contestant podium scoreboards. Usually, the flip was left-to-right on a vertical axis, although up/down on a horizontal axis was not completely unknown.

Advantages to these displays include:

high visibility and wide viewing angle in most lighting conditions;

little or no power consumption while the display remains static; and

fault-tolerance during a power loss or disruption -- the display will not normally reset.

Distinct sound draws attention to the board when the information is updated.

In the case of the latter the Massachusetts Bay Transportation Authority has specifically designed the new LCD replacements for its aging Solari boards at North Station and South Station to emit an electronically generated flapping noise to cue passengers to train boarding updates.

Pop culture references

The television game show Chain Reaction on GSN features computer-simulated split-flap displays to display the various words in a chain.

The 2004 movie The Terminal shows such a display being used in the airport where the main character Victor Navorski is trapped.

The television show Lost prominently featured a split-flap counter during its second season.

See also

Analog clock with digital display ("flip clock")

Display device

Solari departure board

Patents

U.S. Patent 3,501,761 Remote-Controlled Display Device for Selectively Displaying Signs or Words

External links

Wikimedia Commons has media related to: Split-flap displays

Solari di Udine homepage

SEGD Design Awards: A Sign of Democracy



v?d?eDisplay technology

Video

Cathode ray tube Digital light processing Field emission Interferometric modulator display Laser TV Light-emitting diode (organic) Liquid crystal Plasma Surface-conduction electron-emitter (SED) Vacuum Fluorescent Video projector display

Non-video

Electromechanical (Flip-dot Split-flap Vane) Electronic paper Eggcrate Nixie tube

3D display

Stereoscopic Autostereoscopic Computer Generated Holography Volumetric Laser beam

Static media

Hologram Movie projector Neon sign Rollsign Slide projector

Comparison of display technology

Categories: Display technology

Hidden categories: Articles lacking sources from December 2007 | All articles lacking sources(and so on)
To get More information , you can visit some products about
composite wood panels,
solar photovoltic panels,
.
The Timber products should be show more here!

Split-flap display

I want to introduct something about Timber.

Highly sought Autralian native hardwoods green sawn or kiln dried timber forms. Cut to size, Full ranges of grades. The timber species are: Blackbutt, Brush Box, Spotted Gum, Blue Gum, Tasmanian Oak, Red Gum, Red Ironbark, Rose Gum, White Mahogany, Tallowwood, Turpentine, Cypress and Camphor Laurel. Timb




Flap display as departure board in Hannover train station, Germany



Section of a split-flap display board at Frankfurt (Main) Hauptbahnhof (taken April 2005).



Schematic of a split-flap display in a digital clock display



Flap departure board at Gare du Nord (Paris)

A split-flap display, sometimes simply flap display, is a display device that presents alphanumeric text, and possibly fixed graphics.

Contents

1 Description

2 Pop culture references

3 See also

4 Patents

5 External links


//


Description

Each character position or graphic position has a collection of flaps on which the characters or graphics are painted or silkscreened. These flaps are precisely rotated to show the desired character or graphic. Today, these displays are often found in train stations and airports, where they typically display departure and/or arrival information, although digital equivalents are far more common now.

Such displays are often called 'Solari boards', named after Solari & C. Udine, a large manufacturer of such boards continuing to the present day.

Sometimes the flaps are large and display whole words, and in other installations there are several smaller flaps, each displaying a single character. The former method is of course limited on the words it can display by what is on the flaps, whereas the latter system is not and output messages can be changed without the need for the addition or replacement of flaps, although images cannot. In the example image on the right, we can see that the destinations in the centre of the picture of split up into characters, whereas the messages left and right of these occupy entire flaps.

Flip-dot displays and LED display boards may be used instead of split-flap displays in most applications. Their output can be varied more easily (by reprogramming instead of replacement of physical parts in the case of graphics) but they suffer from lower readability. They also can refresh more quickly, as most split-flap displays only rotate in one direction.

Many game shows of the 1970s used this type of display for the contestant podium scoreboards. Usually, the flip was left-to-right on a vertical axis, although up/down on a horizontal axis was not completely unknown.

Advantages to these displays include:

high visibility and wide viewing angle in most lighting conditions;

little or no power consumption while the display remains static; and

fault-tolerance during a power loss or disruption -- the display will not normally reset.

Distinct sound draws attention to the board when the information is updated.

In the case of the latter the Massachusetts Bay Transportation Authority has specifically designed the new LCD replacements for its aging Solari boards at North Station and South Station to emit an electronically generated flapping noise to cue passengers to train boarding updates.

Pop culture references

The television game show Chain Reaction on GSN features computer-simulated split-flap displays to display the various words in a chain.

The 2004 movie The Terminal shows such a display being used in the airport where the main character Victor Navorski is trapped.

The television show Lost prominently featured a split-flap counter during its second season.

See also

Analog clock with digital display ("flip clock")

Display device

Solari departure board

Patents

U.S. Patent 3,501,761 Remote-Controlled Display Device for Selectively Displaying Signs or Words

External links

Wikimedia Commons has media related to: Split-flap displays

Solari di Udine homepage

SEGD Design Awards: A Sign of Democracy



v?d?eDisplay technology

Video

Cathode ray tube Digital light processing Field emission Interferometric modulator display Laser TV Light-emitting diode (organic) Liquid crystal Plasma Surface-conduction electron-emitter (SED) Vacuum Fluorescent Video projector display

Non-video

Electromechanical (Flip-dot Split-flap Vane) Electronic paper Eggcrate Nixie tube

3D display

Stereoscopic Autostereoscopic Computer Generated Holography Volumetric Laser beam

Static media

Hologram Movie projector Neon sign Rollsign Slide projector

Comparison of display technology

Categories: Display technology

Hidden categories: Articles lacking sources from December 2007 | All articles lacking sources(and so on)
To get More information , you can visit some products about
composite wood panels,
solar photovoltic panels,
.
The Timber products should be show more here!

Border Timbers

I want to introduct something about Monogram Side-by-Side Refrigerator Panels.

GE Monogram 36 Side-by-Side Refrigerator! It is black in color. This refrigerator is brand new in the box. We will securely crate this refrigerator in its original box and ship to you with the full manufacturers warranty! Overhead Evaporator- An overhead evaporator provides direct airflow to each compartment, maximizes storage capacity and optimizes energy efficiency.Upfront Electronic Controls with Digital Readout Multi-Shelf Halogen Light Tower (Both Fresh Food and Freezer Section) Multi-Shelf Air Management Tower Climate Control Drawer with Express Chill, Express Thaw and Select Temp- The climate control drawer functions like a refrigerator within the refrigerator. Precise controls allows you to chill or thaw quickly for spontaneous entertaining. Monogram Side-by-Side Refrigerator Pane


Border Timbers

Headquarters

Mutare

Industry

Forestry, sawmilling

Products

Wood

Website

http://www.bordertimbers.com/

Border Timbers is a forestry and sawmilling company of Zimbabwe. The company operates 5 forest estates and 3 sawmills. Principal products include pine and eucalyptus. Border's stock is listed on the Zimbabwe Stock Exchange and its stock index, the Zimbabwe Industrial Index.

Operations

Border's forest estates are located in Sheba, Zimbabwe, Imbeza, Charter, Zimbabwe, Tilbury, Zimbabwe and Sawerombe, totalling over 470 square kilometres.

Border's sawmills are located in Sheba, Charter and Tilbury; annual combined output is over 160,000 cubic meters, 95% percent of which is pine.

Rough sawn timber is either sold directly to customers or processed at one of two Border factories, both located in Mutare:

The Paulington Factory produces mainly veneer, plywood and blockboard.

The Nyakamete Factory, also known as Border Timbers International (BTI), is a subsidiary of Border Timbers and produces doors, shelves and other products for the export market, e.g. South Korea and the United States.

External links

Border Timbers

This African corporation or company article is a stub. You can help Wikipedia by expanding it.

This Zimbabwe-related article is a stub. You can help Wikipedia by expanding it.

Categories: African company stubs | Zimbabwe stubs | Companies listed on the Zimbabwe Stock Exchange | Companies of Zimbabwe | Agriculture in Zimbabwe | Forest products companies | Mutare(and so on)
To get More information , you can visit some products about
acrylic lampshade board,
product catalog template,
.
The Monogram Side-by-Side Refrigerator Panels products should be show more here!

North 26

I want to introduct something about wholesale Skirts:ed Hardy Rock & republic.

Our company is a professional company dedicating in producting and selling shoes, clothes, arts, craftworks, and so on. The shoes we can offer include:Nike sports shoes(Nike Jordan 1-20,Air max 95/97/2003/2004/tn/rift,Nike shoxTL/R4/NZ/TL3/TL4,turbo,af1,dunk,James and other name brand athletic footwear such as adidas(Adidas,prada,gucci,bapesta,chanel,ice cream,timberland LV puma etc.) and hoody,pant,Jeans,shirts,t-shirts,Jersey,basketball shoes,short,IPOD nano,mp3/mp4,watches,Sunglasses,glasses,hats,caps,jacket,kid shoes,women shoes,Pen,bags,handbags, boots,Jewelry,Wallets,Purses,Scarf,Silk Scarves etc. Company name: HengFong manufacture & export Co.,Ltd address:Xinjiao South Street Haizhu Area Xiamen website: http://www.35dropshipping.com email: lsy_121@yahoo.com.cn lsy_121@hotmail.c


The North 26 is a boat designed by Julian D Everitt in 1982, Cowes UK, designer of the very successful E boat. Big brother to the E-boat, intended for Yacht racing Inshore and in Junior Offshore Group races to rate under Channel now IRC measurement rule. Examples race the English Channel and have a wide flat sole plate that enables them to sit the mud in English ports with the keel retracted. This feature also enables safe beach sitting whilst cruising and use as a Trailer yacht.

Contents

1 Specifications

2 Sailing Details

3 Accommodation

4 Special features

5 Construction

6 References


//


Specifications

LOA Length

25ft 3 in (8 m)

Length waterline

23 ft 6 in (7.16 m)

Beam Width

9 ft 0 in (2.74 m)

Draft Board down

5 ft 6 in (1.68 m)

Draft Board up

1 ft 0 in (0.3 m)

Displacement

4150lb (1890 kg)min. sailing

Ballast

1700lb ( 770 kg)

Tow Mass

3700 lb (1680 kg)+ trailer + gear

Rigging

3/4 Fractional rig sloop

Mast

36 ft 6 in ( 11.6 m)

varies, 2 or 3 spreader

Sails

Main

223 ft2 ( 20.7 m2)

Jib < (100%)

ft2 ( m2)

#1 Genoa (%)

204 ft2 ( 20.7 m2)

#2 Genoa (%)

125 ft2 ( 11.61 m2)

#3 Genoa (%)

89 ft2 ( 8.27 m2)

Spinnaker

490 ft2 ( 45.52 m2)

I = 29.3 ft (8.33 m)

J = 8.9 ft (2.71 m)

P = 33.3 ft (10.15 m)

E = 11.9 ft (3.63 m)

Sailing Details

Handicaps; PHRF = , Portsmouth = , IRC = about 0.934 (1999),

Class based Handicaps CBH (Aust.) = 0.7280 prov. (2000) Aluminium cruising, Other = ,

Sailing Characteristics; A long waterline boat, easily driven, giving an exhilerating performance while providing comfortable accommodation and safe cruising.

Notable Performances; First in the UK 'Round the Island' race non-IOR against 700 yachts. First in Tomatin Triohy as scratch boat giving J 24's nearly 2 min's an hour handicap advantage.

Accommodation

With a wide beam and a long waterline length equal to that of a ? tonne yacht the North 26 is comparitably a big volume boat for its length. But is definitely not a loating caravan as its performance attests.

The standard layout has two separate cabins plus a separate toilet compartment. The forward cabin contains a full length V- berth. The main salon has a full length settee on the starboard side with deep lockers above, below the deck. A quarter berth extends beneath the cockpit on the same side. On the port side is the galley with built in two burner spirit stove, a sink and a deep icebox beside the companionway. A folding table can be hinged from the centre board case with a short settee on the port side. An alternative layout would allow for two full length settees and two quarter berths with the galley above the port side and the use of a portable icebox.

This boat can cruise comfortably with four adults and accommodate 5 or 6 people when need be, say after a race.

Number of crew to race = 4 or 5, Berths = 5 or 6, Galley =provision for 2 burner stove and sink, portable icebox. Water bladder. Head = portable in separate compartment, Navigation =in salon, Maximum headroom = 5.5 ft, 1.75 m, to standard plan. But 5 ft 11 in (1.88 m) in versions where 5 inches (125 mm) added to the hull freeboard, allows full standing headroom for most people.

Special features

Outboard motor housed in locker with bomb-bay doors at companionway. Doors close up when sailing. Hydraulic operated keel lifting. Keel can be bolted down when racing.

The halyards and sheets lead back to the companionway for central control including mainsail furling, two winches located on the cabin top and two on the side decks handle all tasks. The mast design chosen avoids the need for running backstays, as these are definitely a hindrance and safety problem when cruising short handed.

A deep anchor locker is provided in the bow, ample room for an electric winch. When the outboard is lowered in its bridge-deck well, the propeller is on the centreline of the boat and well forwards of the stern, so that even in rough conditions the prop will not come out of the water, a problem with stern mounted outboards. When not in use the outboard is out of the way and protected without the need for heavy lifting and removal each trip.

Towable with large 4 WD of about 4 litres, depending on local transport regulations.

Construction

Country of origin, UK

Hull material, design for Ply, Aluminium or Fibreglass. Multichine for ease of amateur construction. The boat is built inverted for ease of access, using fabricated ply or aluminium frames. To minimise ply wastage and enable quick fit out the bulkheads form part of the furniture. There is no need for full size patterns as each frame is fully dimensioned on the drawings. West system...(and so on)
To get More information , you can visit some products about
square wall clocks,
sean john coats,
.
The wholesale Skirts:ed Hardy Rock & republic products should be show more here!

Fiber cement siding

I want to introduct something about LED Mood Light Cubes 52 & 72mm.

Place of Origin: China Model No: DB-085 / 087 Brand Name: DB-085 / 087 Certification: CE RGB LED: RoHs Materials LOGO Imprint: lithium battery Price Terms: FOB HK or Shenzhen USD 0.6~1.1 Terms of Payment: L/C,T/T,Paypal Supply Ability: 5000 Piece/Pieces per Day Minimum Order: 5000 Piece/Pieces Packaging: White Box Delivery Lead Time: 20 days Features: 1) Battery: 2pcs CR-2032 batteries, lasting more than 20 hours 2) Good for home decoration, logo imprint 3) 2 different sizes available, or as per customers' requests 4) LED colors can be changed to single color or flashing functions Packing: White box or PVC box 1) Battery:2pcs CR-2032 batteries, lasting more than 20 hours




Hardipanels on design-build addition, Ithaca NY(ochshornDesign.com)

Fiber cement siding (or "fibre cement cladding" in the UK and Australasia) is a building material used to cover the exterior of a building in both commercial and domestic applications.

Contents

1 Usage

2 Specifications

3 Installation

4 History

5 Durability

6 Fire Resistance

7 Alternatives

8 External links

9 See also


//


Usage

Fibre cement is a composite material made of sand, cement and cellulose fibers. In appearance fibre cement cladding most often consists of overlapping horizontal boards, imitating wooden cladding, clapboard and imitation shingles. Fiber cement siding is also manufactured in a sheet form and is used not only as cladding but is also commonly used as a soffit / eave lining and as a tile underlay on decks and in bathrooms.



CSR Fiber Cement sheet cladding - dwelling addition, Hardys Bay, NSW, Australia (Article)

Fiber cement cladding is not only used as an exterior cladding, it can also be utilised as a substitute for timber fascias and barge boards in high fire areas.

Specifications

Fibre cement sheeting products are manufactured in Australia by CSR, BGC and James Hardie in accordance with Australian Standard 2908.2000, "Cellulose Cement Products". Fiber cement siding and sheeting is produced in the United States by CertainTeed Corporation. In Europe, these products are manufactured and marketed by Eternit.

Sheet sizes vary slightly from manufacture to manufacture but generally they range between 2400 3000 mm in length and 900 1200mm in width (600 & 450 mm increments). This manufactured size minimises on-site wastage as residential floor, wall and roof structures lay structural members at 450 or 600 centres.

Fibre cement thicknesses vary between 4.5-18mm and also vary in density the lower density resulting in a fibrous rough edge when cut and the higher density having a cleaner smoother edge when cut.

Thermal resistance and sound transmission vary greatly between fiber cement products. Fiber cement sheet products rate poorly in thermal resistance and sound transmission and separate wall insulation is highly recommended. Generally the thicker and denser the product the better resistance it will have to temperature and sound transmission.

Installation

Fibre cement cladding is a very heavy product and requires two people to carry the uncut sheets. Thin fibre cement cladding is fragile before installation and must be handled carefully; it is prone to chipping and breakage if improperly handled.

Once the product is cut it may again require two people to install one to hold the sheet flush against studwork and the other to nail the product in place.

Cutting fibre cement cladding sheeting usually requires a mechanised saw or metal hand shears and sheets can be cut to size in three ways:

Thinner sheets can be scored with a heavy duty cutting blade and snapped

Purpose made "fibro cutter" (an Australian term)

Thicker and denser sheets require cutting by a mechanical saw

Some caution must be exercised to properly ventilate areas where FCS is being cut; long-term exposure to the silica dust generated during the installation process can cause silicosis.

Fibre cement cladding can be painted before or after installation. (For areas of exposure, weatherproof paint must be used.) Once the product is fixed the joints are usually covered with timber battens and the entire wall surface is painted.



Detail - timber battens on fibre cement cladding, dwelling addition, Hardys Bay, NSW, Australia (Article)

History

Fibre cement products came about as a replacement for the widely used "Asbestos Cement Sheeting" product manufactured by "James Hardie" until the late 1980s.

Durability

The external cladding products require very little maintenance once installed and painted. The thicker/denser fiber cement products have excellent impact resistance but the thinner less dense products need to be protected from impact.

Fire Resistance

Fibre cement cladding is a non combustible material which is widely used in high bush fire prone areas throughout Australia . Pictured above is CSRs' Fiber Cement cladding inea board which has been substituted for the traditional timber fascia and barge board materials.

Alternatives

Competitors to fiber cement cladding are imitation clapboard include vinyl, PVC, wood composite products and aluminum siding. Compared to wooden siding, fiber cement is not susceptible to termites or rot.

External links

Installing Fiber Cement Siding

Fibre cement cladding

See also

Asbestos shingle, of similar composition and sometimes similar appearance.

Cement board

Fibro

Eternit

Categories:...(and so on)
To get More information , you can visit some products about
decorative floor tiles,
polished floor tiles,
.
The LED Mood Light Cubes 52 & 72mm products should be show more here!

Lead came and copper foil glasswork

I want to introduct something about 8.25*22.5 wheels.

Tyres and Wheels 750V-20 10.00-20 10.00R20 8.25*22.5 11R22.5 9.00*22.5 12R22.5 11.75*22.5 385/65R22.5




A typical copper foil Tiffany lamp, with a jonquil daffodil design

Lead came and Copper foil glasswork are the arts and crafts of cutting colored glass and joining the pieces into picturesque designs.

The traditional method uses lead came. This is the method used for centuries in Europe, mainly in Religious buildings such as cathedrals, churches and monasteries, and including wealthy or aristocratic homes.

An alternative method, replacing the lead came with copper foil, was invented in the 19th century, enabling creation of three-dimensional works, in addition to two-dimensional ones to which the lead came method is limited. The copper foil artwork is commonly called Tiffany stained glass, even though there is a debate about whether John La Farge or Louis Comfort Tiffany invented this alternative to lead came glasswork.

Contents

1 Overview

2 The process

2.1 Design

2.2 Transferring the design to glass

2.3 Cutting the glass

2.4 Grinding the cut glass

2.5 Glass saws

3 Lead came technique

3.1 Preparation of lead for assembly

3.2 Assembling the lead and glass

3.3 Soldering the lead joints

3.4 Cementing the lead and glass panel

3.5 Adding reinforcement bars

4 Copper foil technique

5 Tools and materials

5.1 General

5.2 For lead came work

5.3 For copper foil work

6 See also


//


Overview

In both lead came and copper foil glasswork, cut pieces of stained glass are joined together in a framework of lead.

In the lead came method the pieces of glass are embedded into the channels of the came, and the joints between the came strips soldered together.

In the copper foil method, the edges of the glass pieces are wrapped with adhesive copper tape, and soldered together along the adjacent copper strips.

The process



The steps in creation of Lead Came and Copper Foil Glasswork

Design

The first step for both techniques is to create a design on paper. This draft must consider constraints such as reduction of buckling risk, overall structural integrity, limiting the convergence of lead lines, and cuttability of each piece of glass within.

The next step is to make a template copy of the design for cutting the glass. The width of the lead came or the copper foil that separates the pieces of glass may be compensated for with double blade pattern shears that remove a thin strip of material on the template copy.

For large designs, a scale model may be made, which is digitally photographed and further modified with AutoCAD. After measurements and other notations are applied, the full pattern is printed on a large-format printer.

Transferring the design to glass

Four methods may be employed.

The cut paper may be glued to the glass before cutting it

The cut paper to may be pressed against the glass and its outline traced on the glass with a marker.

The pattern may be affixed to a light box or light source. Sheet glass is placed over the pattern, and traced with a marker.

The edge of the pattern piece may be followed with the cutter.

Cutting the glass

The glass is scored using a steel or carbide wheel glass cutter lubricated with cutting oil. Glass is broken at the score using breaker-grozier pliers, running pliers or built in groziers on a traditional glass cutter. This works because glass breaks along its weakest point when it bends. The ball end on many glass cutters is used to break complicated cuts in a piece of glass. Tapping the ball end along the score on the opposite side of the glass sends a vibration through the glass that helps it break along the score. Also, the notches in most basic glass cutters can be used to grab small bits of glass for breaking.

Grinding the cut glass

At this stage, the cut glass pieces have sharp edges and inaccuracies in their shape. The glazier can use an electric glass grinder with a diamond-coated grinding wheel to smooth the glass pieces, or a carborundum stone.

Glass saws

An alternative to the cutting and grinding steps is the use of a ring saw or band saw. Such saws permit the cutting of shapes impossible with a wheel cutter.

This is where the processes for each of the two methods split. The next section describes the steps for the lead came method. The equivalent copper foil steps are described in the copper foiling section below.

Lead came technique



A 16th century lead came glass window, church Notre Dame, Les Andelys, Normandy, France

The lead came has channels into which the glass pieces are inserted. There are two types of lead came: for the circumference of the design, came with a U-shaped cross section may be used, as it takes glass only on one of its sides. For the middle of the design, came with an H-shaped cross-section is...(and so on)
To get More information , you can visit some products about
yamaha motorcycle parts,
haier refrigerator parts,
.
The 8.25*22.5 wheels products should be show more here!

Antistatic mat

I want to introduct something about Batteries Candle.

PSM Ecological Environment Material PSM material is a new type of disposable product that integrates rigidity, toughness and elasticity through modifying and plasticizing starch---the main raw materials. It is the good raw material for disposable dish wares, films, bags and package, and has the following characteristics: strong ability of adaptation, broad usage, recoverable edge scraps, and wastes able to be biologically decomposable. ?PSM? new materials produced by our company are divided into two major categories, five series and over 30 kinds, suitable for different fields and customers. PSM MATERIAL CHARACTERISTICS ? Corn starch, a renewable resource, is the major raw material of PSM where the cost is low and the supply is abundant and stable in China. ? Unique and revolutionary ecological materials that can be fully and completely degraded into harmless substances. ? PSM can be degraded under compost conditions and by incineration as well. Only non-tonic smoke is emitted and a white res


An antistatic floor mat or ground mat is one of a number of antistatic devices designed to help eliminate static electricity. It does this by having a conductive material embedded within the mat that collects the static. The mat would need to be grounded (earthed). This is usually accomplished by plugging into the grounded line in an electrical outlet. It's important to discharge at a slow rate, therefore a resistor should be used in earthing the mat. Some ground mats allow you to connect an antistatic wrist strap to them.

Reference

Webopedia

Anti-Static Mat manufacture

Categories: Electrical safety | Electrostatics(and so on)
To get More information , you can visit some products about
Fiber Patch Panel,
pharmacentical packing material,
.
The Batteries Candle products should be show more here!

Memory foam

I want to introduct something about Pre-painted Hot Dip Galvanized Steel coils/ sheets/ strips.

Place of Origin: Taiwan Pre-painted Hot Dip Galvanized Steel coils/ sheets/ strips Dimension: Coating Thickness Thickness (mm) Width (mm) Top: 5 ~ 12 um Base: 5 ~ 12 um 0.2~1.5 30~1500 SPEC: Product Type Coating Type Product Spec. Substrate Spec. Coating Designation Coating Thickness 1. Pre-Painted Hot-Dip Galvanized Steel Coil (PPGI) 2. Pre-Painted Hop-Dip 5% Al-Zn Coated Steel coil (PPGF) 3. Pre-Painted Hop-Dip 55% Al-Zn Coated Steel Coil (PPGL) 1. Polyester 2. Silicone Modified Polye




How memory foam reacts to heat

Memory foam is made from polyurethane with additional chemicals that increase its viscosity level, thereby increasing its density. It is often referred to as visco-elastic polyurethane foam. Depending on the chemicals used and its overall density, it is firmer in cool temperatures and softer when warm. Higher density memory foam reacts to body heat which allows it to mould itself to the shape of a warm body within a few minutes. A lower density memory foam is pressure-sensitive and will mould more quickly to the shape of the body. The example often used to demonstrate its properties is that a hand pressed into the foam and then removed will leave a clear impression in the foam.

Contents

1 History

2 Hazards

3 References

4 External links


//


History

Memory foam was originally developed by NASA to decrease the very high pressure caused by the extreme g-force occurring during the take-off of the space shuttle.[citation needed] It was never used in the space program but was subsequently used medically, for example by patients who used to lie in bed on hard or very firm mattresses for long periods of time without regularly moving such as being bed-bound after a paralyzing stroke. The pressure over some of their bony regions decreased or stopped the blood flow to the region causing pressure sores and/or gangrene. Memory foam mattresses helped hugely to decrease such events.

Memory foam was initially too expensive for general use[citation needed], but in recent years it has become cheaper to produce and is now widely available. Its most common domestic uses are mattresses, pillows, and mattress toppers. It still has medical uses, such as wheelchair seat cushions, hospital bed pillows and padding for persons suffering long-term pain or postural problems; for example, a memory foam cervical pillow may alleviate chronic neck pain. Its heat-retaining properties may help some pain sufferers who find the added warmth helps to decrease the pain.[citation needed]

A memory foam mattress is usually denser than an ordinary foam mattress. This makes it more supportive but also heavier. It is often seen as a good compromise between the comfort of a soft mattress and the supportiveness of a firm one. Memory foam mattresses often sell for more money than traditional mattresses but they may last longer due to their resistance to parasites such as dust mites.[citation needed]

The property of firmness (hard to soft) of memory foam is used in determining comfort. Firmness is measured by a foam's IFD (Indentation Force Deflection) rating.

IFD measures the force (in pounds) required to make a dent 1 inch into a foam sample 15" x 15" x 4" by a 8 inch diameter (50 sq in) disc - known as IFD @ 25% compression. IFD ratings for memory foams range between super soft (IFD 10) and semi-rigid (IFD 12). Most memory foam mattresses are firm (IFD 12 to IFD 16).

Some report that IFD is a poor way to measure softness of memory foam, and that foam density as a measure of quality is more important . Foam density of 5 lbs per cubic foot or greater is considered high quality.

Hazards

When new, some memory foams give off a distinct chemical odor which many people find unpleasant which some say is akin to the smell of paint. This odor decreases with airing, but some people remain sensitive to it. Emissions from memory foam mattresses may cause more respiratory irritation than other mattresses. Mildew and house dust mites may not occur as frequently so asthma attacks may be less frequent and severe

Memory foam, like other polyurethane products, can be combustible. State and US Federal Laws have been enacted in the USA to require all bedding, including memory foam items, be resistant to ignition from an open flame such as a candle or cigarette lighter. There has been some concern that high levels of the fire retardant PBDE, commonly used in memory foam, could cause health problems for users of memory foam bedding products.

References

^ Make your own memory foam bed

^ Anderson RC, Anderson JH, Respiratory toxicity of mattress emissions in mice, Archives of Environmental Health, Jan-Feb 2000

^ Memory Foam MSDS Sheet

^ California Bureau of Home Furnishings and Thermal Insulation

^ Arlene Blum The Fire Retardant Dilemma, 12 Oct. 2007

External links

Polyurethane Foam Association

Memory Foam Reviews and Guides

Categories: Polyurethanes | Foams | Non-Newtonian fluids | Bedding

Hidden categories: All articles with unsourced statements | Articles with unsourced statements since August 2008(and so on)
To get More information , you can visit some products about
micro plush blanket,
travel blankets,
.
The Pre-painted Hot Dip Galvanized Steel coils/ sheets/ strips products should be show more here!

TeamViewer

I want to introduct something about MULTI BAND RADIO (LR0830).

please contact with us via our e-mail: lwarlwar at hotmail , com MULTI BAND RADIO (LR0830) Model No.:LR0830 FM/MW/SW 14 BANDS RADIO WITH SPEAKER 60PCS/CTN/46x37x35.5CM , N/G.W:17.1/20.7K


TeamViewer

Developed by

TeamViewer GmbH

Latest release

4.0.5543 / 29 January 2009

OS

Windows, Mac OS

Available in

English, Spanish, German, French, Italian, Dutch, Portuguese

Type

Remote administration software

License

proprietary, free for private usage

Website

www.teamviewer.com

TeamViewer is a software package for remote control, desktop sharing and file transfer that works behind firewalls and NAT proxy. TeamViewer was founded in 2005 in Uhingen, Germany and has over 15 million users worldwide.

Contents

1 Establishing Connections

2 Unattended servers

3 VPN

4 Cross-platform

5 Personal and Enterprise editions

6 Security

7 See also

8 External links

9 References


//


Establishing Connections

To connect to another computer run TeamViewer on both machines without the need of an installation procedure. With the first start automatic partner IDs are generated on both computers. To establish a connection it is required to enter the partner ID and the password into TeamViewer.

Unattended servers

There is a Host Module which runs as system service. This allows users to connect to unattended PCs or servers.

VPN

TeamViewer includes the possibility to run a VPN (Virtual Private Network). The computers which are connected through a VPN behave like in a common network. This allows to share network resources with partners around the world.

Cross-platform

Cross-platform work is possible between Windows and Macintosh systems.

Personal and Enterprise editions

The personal-use version is provided for free, while the business editions start at $249. The personal-use version of the software has limited features compared to the commercial version, and it is not licensed for use in a commercial environment.

Extras which are provided additionally in the licensed version are the customization of the client module (QuickSupport) and the TV Manager, a database AddOn tool which allows the session logging for billing purposes.

Security

TeamViewer uses a full encryption, based on RSA private-/public key exchange and AES (256 Bit) session encoding.

As the private key never leaves the client and the host computer, it is ensured by this procedure that interconnected computers cannot decipher the data stream. Each TeamViewer client has already implemented the public key of the master cluster and can thus encrypt messages for the master server and check the signature of the master, respectively. This PKI (Public Key Infrastructure) effectively prevents Man-in-the-middle attacks.

Despite the encryption the password is never sent directly but only through a challenge-response procedure and is only saved on the local computer.

See also

Citrix XenApp

Comparison of remote desktop software

GoToMeeting

NX technology

Remote Desktop Protocol (RDP)

Terminal Services

Virtual Network Computing (VNC)

External links

Official site

TeamViewer in German Wikipedia

References

^ TeamViewer home page

^ Mactech

^ www.techradar.com

^ TeamViewer licensing conditions



v?d?eRemote administration software

Apple Remote Desktop Back Orifice Back Orifice 2000 Citrix XenApp System Center Configuration Manager Secure Shell TeamViewer NetBus pcAnywhere Remote Desktop Protocol Remote desktop software Sub7 Timbuktu Virtual Network Computing

Categories: Network-related software | Remote desktop | VNC(and so on)
To get More information , you can visit some products about
sauce cup,
empty tea bags,
.
The MULTI BAND RADIO (LR0830) products should be show more here!

Steve Blame

I want to introduct something about 2600 housing.

1) Original housing with small parts, lens 2) Original with high quality 3) Competitive price 4) Various housings of Motorola available 5) Prompt delivery and excellent after-sale service for more information, welcome to our website. New online enquiring service waiting for you. 2600 housing mo






This biographical article is written like a resume. Please help improve it by revising it to be neutral and encyclopedic. (December 2007)

Steve Blame (born in 1959 in Chelmsford, England) was MTV News Editor and Presenter between 1987 and 1994. During his time at MTV he interviewed all major pop stars from Madonna to McCartney. As the main on-air presenter spearheading MTV's pro-social campaigns Blame would also bring world leaders and religious figures to MTV. Gorbachev, Delors, Peres, and even the Dalai Lama would be asked to comment by Blame on the issues of the day. After leaving MTV in 1994, the former Mathematics and Physics graduate took up residence in Germany where he set up Viva 2. Under his direction the channel won the Gold Art Director's Award for its on-air design in 1996. Today Blame is an international screenwriter and TV format developer based in Cologne. His latest format 'Where is the Money' co-created with Eyeworks and 2STV was nominated for the Rose D'or award in 2005.

Contents

1 Education

2 Television Presenter

2.1 MTV News (1987-1994)

2.2 MTV's Pro-Social Campaigns (1992 - 1994)

2.3 Viva 2 (1994-1996)

3 Program Director/Executive Producer

4 TV Appearances

5 Book Contributions

6 Acting

7 Formats

8 Performance

9 Discography

10 Interviews

11 References


//


Education

Combined Honours Degree: Mathematics and Physics. Exeter University 1980. Masters Degree: Screen writing. University of East Anglia 2006.

Television Presenter

MTV News (1987-1994)

Presented MTV News Bulletins from the MTV studios in Camden and also on location around Europe.MTV News at Night; 1987-1994 Presented the daily news show. Location reports exploring local music scenes from Germany, U.K., France, Italy Spain, Russia, Netherlands, Switzerland, Belgium, Turkey, Slovenia, Monaco, Sweden, Austria, Norway, Denmark, Greece, Ireland, Finland, South Africa, Iceland, and Israel.

MTV's Pro-Social Campaigns (1992 - 1994)

Vote Europe: Live shows urging Europe's youth to vote in the European Elections. Interviews included Jacques Delors, Gorbachev, Dalai Lama, Shimon Peres and Gro Harlem Brundtland.

MTV Free Your Mind 1992 Live debate about the problem of racism in Europe with studio guests (Campino and Jean-Paul Gaultier amongst others). Filmed interviews included Wolfgang Schauble and Peter Hain MP.MTV World Aids Day 1987-1994 He spearheaded MTV's Aids Awareness campaigns on World Aids Day.Take the Blame - 1988 Weekly six part chat show with co-host Leigh Bowery. Guests included Jackie Collins, The Communards, Boy George, Adam West (Batman), Nina Hagen, Lenny Henry, Leo Sayer, Jean-Michel Jarre and Dolph Lundgren amongst others. The show contained sketches remaking famous movie scenes e.g. Casablanca, Superman and The Sound of Music. Was probably the campest show ever shown on MTV.MTV's U.S. Video Music Awards (European version) Backstage host from MTV's Video Music Awards from the States. Interviews included Nirvana, Aerosmith, Mick Jagger, Whitney Houston, Annie Lennox, Lenny Kravitz etc.Reverb - 1988 Weekly review show co-presented by Chris Salewicz. This six part seriesr was replaced by Take the Blame.Madonna in Milan etc. Interview specials: Madonna in Milan, Boy George, Sind O'Connor, McCartney and many more.

Viva 2 (1994-1996)

Presenter of Geschmacksache a weekly format on Viva 2 where artists choose the videos which have inspired them the most in their careers.

Program Director/Executive Producer

Viva 2 1994-1996: Program Director, responsible for the building of Viva 2 in Cologne.Tango TV (2002): Program Director, responsible for launch of Music Channel in Luxemburg.

TV Appearances

RTL Explosiv. Fronted alternative view features for RTL Saturday evening show incl. The Royal Wedding, The German Test and the Cannes Film Festival.RTL2: 90s; Pop Sde (Pop Sins) & 90s; The Pop Years. Appearance on German terrestrial network RTL2

Anniversary appearance on MTV Germany to celebrate 23 years of MTV. Also released on DVDVOX: Kochduell: Appearance on daytime cook show celebrity version.

PRO 7: Charlotte Roche Show: Cameo role in spoof documentary on 'pop star` Dick Brave.MTV Europe: 20 years of MTV Special, 2001.

ITV - Simply The Best a music documentary about Tina Turner, 1992.

Book Contributions

Sue Tilly's "Leigh Bowery: The Life and Times of an Icon" (Hodder & Stoughton)

Article on Music Television for Buch der Musikwirtschaft (Moser/Scheuermann, Josef Keller Verlag)

Acting

30 e November, Swedish anti-racist movie Directed by Daniel Fridell. Plays himself.

Formats

Co-developed with Stefan Grebe and Eyeworks 'Where is the Money?'. Nominated for prestigious Rose D'or award in 2005.

'This Song For You' for arte, 1999

...(and so on)
To get More information , you can visit some products about
best rechargeable batteries,
wallet chains,
.
The 2600 housing products should be show more here!

Daisy Chainsaw

I want to introduct something about Giallo California Granite Slabs.

Apexstone Amoy Marble & Granite present wide varieties and strict quality controlled natural stone products. We have gang saw slabs and circular saw half slabs for the stone fabricators including all kinds of stone slabs, such as granite slabs, marble slabs, limestone slabs, travertine slabs, slate slabs, onyx slabs, super thin granite or marble slabs, light panel laminated synthetic aluminum-plastic slabs, and fiberglass backed stone panels. Features: 1. Standard dimension: Random slab, Gangsaw slab: 60~90cmup x free length, 48"-60"up x 96"-110"up, 4'up x 8'up (1200~1850 x 2400~2900mm), Other sizes are available upon request 2. Popular thickness: 20mm & 30mm 3. Surface finish: Polished, flamed & honed 4. Common Packing: Lined with plastic film, then in strong wooden bundles. 5. Quality Control: Polished degree: Above 85 degree Thickness Tolerance: +-1mm for 2cm slab




Daisy Chainsaw

Background information

Origin

London, England

Genre(s)

Punk, Alternative

Years active

1989 1995

Label(s)

Deva Records, One Little Indian

Formermembers

KatieJane GarsideCrispin GrayRichard AdamsVince JohnsonBelinda Leith

Daisy Chainsaw was an English band, that was active between 1989 and 1995.

Contents

1 Career

2 Discography

2.1 Albums/EPs

3 References

4 External links


//


Career

The band formed in 1989 after KatieJane Garside answered an advertisement placed by guitarist Crispin Gray in the music press. Their gigs included grapevines and rag dolls strewn across the stage, and Garside thrashing around in soiled gowns drinking juice from a baby bottle.[citation needed]

The band was successful with their "LoveSickPleasure" EP which included the hit single, "Love Your Money" - primarily due to prime time appearances on ITV's The Chart Show and Channel 4's The Word. However, they had to decline appearing on BBC TV's Top of the Pops because Garside had a throat infection. "Love Your Money" reached number 26 in the UK Singles Chart in February 1992.

Turning down an offer to be signed to Madonna's Maverick record label, they later signed to the indie label, One Little Indian. The follow up singles "Pink Flower" (UK number 65) and "Hope Your Dreams Come True" flopped, as did Eleventeen (UK Albums Chart number 62). In 1993, Garside left the band.

After the departure of Garside, Daisy Chainsaw released a second album, For They Know Not What They Do, with Belinda Leith on vocals, and one more EP titled "You're Gruesome" with Crispin Gray replacing Leith before splitting up.

An episode of Roseanne mentioned the band, as one of Darlene Conner's favorites.

After the split of Daisy Chainsaw, a band named Dizzy Q Viper was formed, made up of previous Daisy Chainsaw members, Gray, Adams and Johnson. After Dizzy Q Viper, Vapid Dolly was created, and this band was made up Dizzy Q Viper members with the addition of Hanayo as lead vocals. The new millennium saw Garside and Gray musically reuniting to form Queen Adreena.

Discography

Albums/EPs

"LoveSickPleasure EP" (1991), Deva Records

"Love Your Money"

"Get Real Pleasure"

"Sick of Sex"

"LoveSickPleasure Maxi-EP" (1991), Deva Records

"Love Your Money"

"Pink Flower"

"Sick of Sex"

"All the Kids Agree"

"Room Eleven"

"Pink Flower EP" (1992)

"Pink Flower"

"All the Kids Agree"

"Room Eleven"

"Hope Your Dreams Come True EP" (1992)

"Hope Your Dreams Come True"

"Propeller Punch"

"Queue For Tranatlantic Alien"

"Music for People Who Have No Friends" (1992), A&M / Deva / One Little Indian Records blue flexidisc

"Propeller Punch"

Eleventeen (1992), One Little Indian Records

"I Feel Insane"

"You Be My Friend"

"Dog With Sharper Teeth"

"Hope Your Dreams Come True"

"Natural Man"

"Love Your Money"

"Lovely Ugly Brutal World"

"Use Me Use You"

"The Future Free"

"Pink Flower"

"Waiting for the Wolves"

"Everything is Weird"

For They Know Not What They Do (1994), One Little Indian Records

"The Future Free"

"Belittled and Beaten Down"

"Sleeping With Heaven"

"Love Me Forever"

"Candy Floss"

"Life Tomorrow"

"Zebra Head"

"Unit Shifter"

"Diamond of the Desert"

"Mosquito"

"Greatest God's Divine"

"Voice of a Generation"

"Looking for an Angel"

You're Gruesome EP (1995), 95 Cheapskates Records

"You're Gruesome" (My Dearest World)

"Sir William Powers"

"Love Me Forever"

References

^ a b c Roberts, David (2006). British Hit Singles & Albums (19th ed.). London: Guinness World Records Limited. p.138. ISBN 1-904994-10-5.

External links

Daisy Chainsaw at Last.fm

Categories: English punk rock groups | British indie rock groups | One Little Indian Records artists | 1990s music groups | Musical groups established in 1989 | Musical groups established in 1995

Hidden categories: Articles needing additional references from January 2009 | All articles with unsourced statements | Articles with unsourced statements since January 2009(and so on)
To get More information , you can visit some products about
Circular Metal Saw,
LED Underbody Kit,
.
The Giallo California Granite Slabs products should be show more here!

The Venetian Macao

I want to introduct something about Sharp 65 Lc65d90u 1080p HD LCD TV. SHARP 65" LC-65D90U 1080P HD LCD TV Product Information Sharp? LC-65D90U is the largest commercially available LCD-TV in the world with elegance and features that are as grand as the TV itself. With a 16:9 aspect ratio, unbeatable resolution of 1920 x 1080 and unrivaled vivid color purity, it is a next-generation TV to carry you into the high-definition future.The LC-65D90U utilizes Sharp? proprietary Advanced Super View/Black TFT Panel, which provides high brightness (450 cd/m2), 80 electronic program guide provides easy sorting and tuning of channels. High Brightness (450 cd/m2) AQUOS?Liquid Crystal Televisions are very bright. You can put them anywhere ?even near windows, doors or other light sources ? and the picture is still vivid. High Contrast Ratio (800:1) provides incredible images whether you're watching dark or bright scenes. Wide Viewing Angles (170?H x 170?V) Sharp's viewing angles are so wide, you can view the TV clearly from anywhere in the room! Detachable Speakers / I

The Venetian Macao
Facts and statistics
Openingdate
August 28, 2007
No.ofrooms
3,000 Suites
Totalgamingspace
550,000sqft (51,000m2)
Casino type
Land-Based
Owner
Las Vegas Sands
Website
Sitio web del Venetian
The Venetian Macao is a Renaissance Venice-themed luxury hotel and casino resort in Macau, China owned by the Las Vegas Sands corporation. The Venetian is a 40-story, $2.4 billion anchor for the 7 resort hotels which are under construction on the Cotai Strip in Macau. The 10,500,000-square-foot (980,000m2) Venetian Macao is modeled on its sister casino resort the The Venetian in Las Vegas and is the largest single structure hotel building in Asia and the fourth-largest building in the world by area.
The main hotel tower was finished in July 2007 and the resort officially opened on August 28 2007. The resort has 3000 suites, 1,200,000sqft (111,000m2) of convention space, 1,600,000sqft (149,000m2) of retail, 550,000square feet (51,000m2) of casino space largest in the world with 3400 slot machines and 800 gambling tables and a 15,000 seat arena for entertainment/sports events.
Contents
1 Casino
2 Accommodation
3 Concerts
4 Sports
5 ZAIA by Cirque du Soleil
6 Back of the house areas
7 Controversy
8 Future development
9 Problems on opening weekend
10 See also
11 References
12 External links
//
Casino


San Luca canal

Cafe Deco in The Venetian Macao
The casino is currently the largest in the world at 500,000sqft (46,000m2). It is further divided into 4 themed gaming areas namely Golden Fish, Imperial House, Red Dragon and Phoenix. The casino consists of over 1000 slot machines and more than 600 gaming tables that are open around the clock.
Facilities and amenities provided inside the casino:
Washrooms
Automated teller machines (ATM)
Casino membership desks (Cotai Rewards Club)
High limit gaming area
Cage with foreign currency exchange counters
Food and beverage outlets located inside the casino: Operated by The Venetian Macao
Bar Florian
Canton
Red Dragon Noodles House
Imperial House Dim Sum
Bellini Lounge
Operated by independent companies:
Morton's of Chicago
Roka
The hotel offers a VIP club named Paiza Club to caters high-rollers and premium guests
The club comes with its own entrance, lobby, reception, team of butlers and guest lifts to the suites.
The gaming area of the Paiza Club is divided into individual private gaming rooms and named after Asian cities such as Yunnan, Guangzhou, Hong Kong, Singapore and Kuala Lumpur.
The guests of the club would have the exclusive access to the club dining outlet, the Paiza Club Dining & Lounge, which opens 24 hours a day.
Accommodation

Lei Garden Restaurant

McDonalds in the Venetian

The Venetian food court
The hotel tower offers 3000 suites which include multi-bay suites for high-rollers.The accommodation floors starts from level 7 up to level 38. These floors are served by 250 guest lifts.
Types of accommodation
Royale
Bella
Rialto
Hospitality parlor
Paiza suites
Royale & Bella
with a floorspace of 70 sq metres or 750 sq feet
a choice of 1 king-sized bed (Royale) or 2 queen-sized beds (Bella)
marble bathroom with a bathtub, shower enclosure, twin vanity basins an separate WC alcove
sitting area with sofabed and plasma TV
another plasma TV in the sleeping area
a working desk with personal copy/fax/print machine
bathrobes, bedroom slippers, iron and ironing board provided
full-stocked minibar
a round dining table with 3 chairs
Rialto
corner suite measured at 170 sq metres or 1830 sq feet
only choice of 1 king-sized bed
separate living room
guest powder room
dressing room in the bedroom
Paiza suite
This category reserved to high-rollers and VIPs. The largest and most luxurious is the Presidente. It is a 12 bay-suite with 4 bedrooms each with own bathroom, a media room, a spacious living and dining area and butler's pantry. Two of the bedrooms comes with its own massage room.
Concerts
A number of artists and performers performed at The Venetian Arena:
The Black Eyed Peas Black Blue & You Tour - 27 October 2007
Beyonc The Beyonc Experience - 3 November 2007
The Pussycat Dolls Live in Macau - 31 December 2007
Jose Carreras 20 January 2008
The Police The Police Reunion Tour - 7 February 2008
Celine Dion Taking Chances Tour - 15 March 2008
Jay Chou World Tour 2008 - 5 April 2008
Sports
The Venetian...(and so on) To get More information , you can visit some products about Antique Bathroom Vanities, ceramics and sanitaryware, . The Sharp 65 Lc65d90u 1080p HD LCD TV products should be show more here!

Battery eliminator

I want to introduct something about Vibrating Sieving Mesh. Typical Sizes we are producing: 1,USA Cobra Wire Mesh Vibrating Screen: 18mesh-80mesh x 1830mm x 760mm 2,USA BL-50 Vibrating Screen: 18mesh-150mesh x 1250mm x 630mm 3,USA DERIK Wave Three Deck Vibrating Screen: 1050mm x 695mm 4,SWAK Wave High Frequency Bonding Vibrating Screen: 1050mm x 695mm 5,Chang'an Double Deck Bonding Vibrating Screen: 20mesh-100meshx1150mmx76mm 6,NS-115/2 (North China Oil Field) Double Deck Vibrating Screen: 40mesh/20mesh-100mesh/20mesh x 1150mmx1000mm 7,Romania Drilling Machine Double Deck Bonding Vibrating Screen: 40mesh/20mesh-100mesh/20mesh x 1170mmx1670mm 8,HS-821 Double Deck Bonding Screen Wire Mesh: 20mesh-100meshx2050mmx1120mm 9,HS-821 Double Deck Sand Removing Screen Mesh: 100mesh/20mesh-150meshx1735mmx520mm 10,NS-861 Dand Removing Screen Mesh: 100mesh-150mesh/20meshx1800mmx560mm 11,3zzS-D Single Layer Hooked Screen: 12mesh-100meshx2050mmx1120mm 12,DERIK Panel High Frequency Bonding Screen: 1050mmx695mm Vibrating
A battery eliminator is a device powered by an electrical source other than a battery, which then converts the source to a suitable DC voltage that may be used by a second device designed to be powered by batteries.
A battery eliminator eliminates the need to replace batteries but may remove the advantage of portability. A battery eliminator is also effective in replacing obsolete battery designs.
Some examples of battery eliminators:
9v mains power supply, size and shape of a PP9 battery, intended to replace the battery in portable radios. 1960s
Solar panel providing power for a portable appliance
History
Early commercial battery eliminators were produced by Edward S. Rogers, Sr. company in 1925, as a complement to his line of "batteryless" radio receivers. Another early producer of battery eliminators was the Galvin Manufacturing Corporation (later known as Motorola) which was opened on September 25, 1928 by Paul Galvin and his brother Joseph E. Galvin, to build battery eliminators for radio receivers installed in automobiles.
While it might seem surprising to use such a device in a car to power a radio, the first car radio receivers were based on vacuum tube technology which required two or three different voltages to function:
LT, typically 4 or 6.3 volts at high current to power the filaments
HT, typically 100 to 300 volts at low current to power the anode circuitry
Additional voltages were sometimes also required for grid bias.
Batteries designed for these portable vacuum tube receivers were a combination of several different battery types and sizes, combined in a single package and intended to slowly wear out at about the same rate. The battery typically connected to the radio via a specially shaped four- or five-pin connector, keyed so that the plug must be inserted correctly.
A battery eliminator would take the typical 6-volt or 12-volt DC power from a car battery and transform it into the required LT and HT needed to power the vacuum tubes in a car radio.
Without a battery eliminator, it was necessary to occasionally replace the battery pack in the vacuum-tube car radio.
See also
Batteryless radio
Batteryless switch
This electronics-related article is a stub. You can help Wikipedia by expanding it.
Categories: Power supplies | Electrical power conversion | Power electronics | Electronics stubs(and so on) To get More information , you can visit some products about cashmere sweater tunic, a7f t shirt, . The Vibrating Sieving Mesh products should be show more here!

Death in Silver (Doc Savage)

I want to introduct something about Italianism Modern Bathroom Cabinet. Global Standard, European Fashion, Joint Venture Company, Door to Door Service but Chinese Price. Ivyo understands pricing & quality are critical points; we have endeavored to get the best possible balance of these important points. Ivyo uses only the best quality materials available & through bulk purchasing. We can offer you a product of a European standard at mush lower cost.
Death in Silver
Cover of the original October 1934 issue of Doc Savage
Author
Lester Dent
Illustrator
Paul Orban
Cover artist
Walter M. Baumhofer
Country
United States
Language
English
Series
Doc Savage
Genre(s)
Pulp Adventure
Publisher
Street & Smith
Publication date
October 1934
Media type
pulp magazine
Preceded by
Fear Cay
Followed by
The Sea Magician
Death in Silver is a Doc Savage pulp novel by Lester Dent writing under the house name Kenneth Robeson. It was published in October 1934.
It was the first Doc Savage story not to include all of his aides, due to author Lester Dent having difficulties using all six characters in every story. Only Ham, Monk and Pat appeared in Death in Silver.
The other three, less popular, main characters are described as being away on private ventures: Johnny giving a lecture in London, Long Tom experimenting on an electrical pesticide in Europe, and Renny building a hydro-electric plant in South Africa.
The original intent was that all three would become the basis of the next three novels.
Johnny's story became The Sea Magician in the next issue of Doc Savage, but this did not happen with all of them.
The follow-up adventure involving Renny later became the basis for the 1991 retro novel Python Isle by Will Murray.
Death in Silver was the third appearance of Pat Savage.
Contents
1 Summary
2 Vehicles & Gadgets
2.1 Doc Savage
2.2 Ham, Monk & Pat
2.3 The Silver Death's-Heads
3 Setting
3.1 Chronology
4 Other Media
4.1 Doc Savage: The Arch Enemy of Evil
5 References
6 External links
//
Summary
The Silver Death's-Heads, a gang of criminals who wear silver overalls and masks, have been committing seemingly random crimes for months. They become involved when they attack Paine L. Winthrop, a shipyard owner who has offices in the same building as Monk. When his office explodes, Monk and Ham investigate but are captured while reporting back to Doc Savage. With his other aides abroad, Doc Savage attempts to rescue them and solve the case alone. One of the first things he accomplishes is to deduce the nature of the explosion, which has eluded his aides and the police it was caused by a three-inch shell.
Investigating the deaths of other witnesses to the attack (a fisherman on the river and an aviator flying that day) leads Doc to Winthrop's Shipyards. The Silver Death's-Heads steal some blueprints to hide their secrets while Doc runs into Winthrop's Secretary, Lorna Zane, and efficiency expert, Harry "Rapid" Pace (who has the annoying habit of repeating almost everything twice). Doc leaves Lorna with his cousin Pat at her new beauty salon/gymnasium. Harry leads the Doc to the home of Bedford Burgess Gardner (owner of Transatlantic Lines and Winthorp's chief rival) based on a comment from the gang overheard at the shipyard.
Again they run into the gang, and pick up Hugh McCoy, Gardner's Financial Relations Consultant (advising on the merger with Paine L. Winthrop's company) and Pace's rival for Lorna Zane's affections. By questioning an injured gang member, who had been poisoned by his own gang, they find that Monk and Ham are held at the "Indian's Head". Doc browses a telephone directory at an all-night drug store and picks out the "Indian Head Club". When asked he explains that its address is on the waterfront and the Silver Death's-Heads always seem to escape by the river. His deduction is correct and, through stealth and violence, he rescues his aides. They all only narrowly miss being killed when the gang demolish the club with a bomb to destroy evidence. Meanwhile, the Silver Death's-Heads kidnap Pat and Lorna from Pat's salon.
Based on a map of New York Harbour found at the club before it exploded and burned down, Doc and Monk go out onto the foggy river to investigate. Diving from the boat, Doc discovers a submerged radio-buoy at a point marked on the map. Further investigation is cut short by a shell apparently fired by an unseen submarine. Ull, the leader of the Death's-Heads (but not the "big brain" behind their plans) sets a trap for Doc with Pat and Lorna as bait. A fake snitch calls Doc with some information but is cut off by a mock attack in another all-night drug store. They make sure to leave clues, especially a trail of footprints in vaseline (from a jar "accidentally" broken in the store), to lead Doc to their hideout. Doc follows the trail using ultraviolet light (because Petroleum jelly glows under ultraviolet light) but approaches the hideout itself in disguise. He is able to penetrate the hideout and successfully avoid the traps set for him but does not manage to rescue Pat or Lorna (as they are not really there).
Moving back...(and so on) To get More information , you can visit some products about digital pocket watch, ceramic sculpture, . The Italianism Modern Bathroom Cabinet products should be show more here!